• Monitors and controls TDS levels for high output commercial systems.
• Large, bright L.E.D. display.
• An alarm will sound if the TDS level rises above the user-set level.
• Installs easily in minutes.
• Includes one sensor probe (see photo).

Install the Panel Mount Controller to constantly monitor TDS levels of water produced by a high-output system.

Adjust the calibration to your needs.

Immediately know if the TDS levels rise above an acceptable level.

A photo of the sensor with cable. The sensor is detachable.

• Range: 0 - 999ppm
• Accuracy: ±2% f.s.
• Resolution: 1 PPM
• Temp. Compensation: Automatic (1 - 65 degrees Celsius)
• Calibration: Adjustable
• Setting: Controlled by on-screen up/down buttons
• Relay Control: The unit will transmit an analog signal to a pump/valve when the ppm level reaches or exceeds the control setting
• Alarm: Optional steady beep (set by user)
• Display: Bright 5/8" L.E.D. display
• Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable
• Power supply: AC 110V / AC 220V
• Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
• Monitor Weight: 476 g (1 lb .8 oz)
• Total Weight: 680.4 g (1 lb 8 oz)