TDSMETER.CO.UK, Inc. www.tdsmeter.com
1-800-383-2777 info@tdsmeter.com
PC 100: CONDUCTIVITY CONTROLLER  
FEATURES
  • Monitors and controls conductivity levels for high output commercial systems.
  • Large, bright L.E.D. display.
  • An alarm will sound if the EC level rises above the user-set level.
  • Installs easily in minutes.

Install the Conductivity Controller to constantly monitor conductivity levels of water produced by a high-output system.

Adjust the calibration to your needs.

Immediately know if the conductivity levels rise above an acceptable level.


A photo of the sensor with cable. The sensor is detachable.

SPECIFICATIONS
  • Range: 0 - 999 µS (micro-siemens)
  • Accuracy: ±2% f.s.
  • Resolution: 1 mS
  • Temp. Compensation: Automatic (1 - 65 degrees Celsius)
  • Calibration: Adjustable
  • Setting: Controlled by on-screen up/down buttons
  • Relay Control: The unit will transmit an analog signal to a pump/valve when the µS level reaches or exceeds the control setting
  • Alarm: Optional steady beep (set by user)
  • Display: Bright 5/8" L.E.D. display
  • Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable
  • Power supply: AC 110V / AC 220V
  • Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
  • Monitor Weight: 476 g (1 lb .8 oz)
  • Total Weight: 680.4 g (1 lb 8 oz)