Click to go home See Our Products Learn more about TDS and how it affects your water, reverse osmosis, water filters and water purification systems Frequently Asked Questions Where to buy TDSMETER.CO.UK products Learn about TDSMETER.CO.UK, Inc. Contact TDSMETER.CO.UK, Inc.
 Basic TDS Tester
 TDS Meter 3
 TDS Meter 4
 TDS Meter 4TM
 EC/TDS Combo Meter
 Waterproof pH Meter
 Waterproof ORP Meter
 TDS-EZ Water Quality
 AP-1: AquaPro (TDS)
 AP-2: AquaPro (EC)
 Conductivity Tester
 Water Quality Tester
 Dual TDS Monitor
 Dual TDS Monitor 2
 Clean Tap Monitor
 Purity Monitor
 External Purity Monitor
 FM-1: Filter Monitor
 FM-2: Filter Monitor
 PSC-150:TDS Controller
 QC-1:TDS Monitor
 In-Line Single Monitor
 Panel Mount Controller
 Dual TDS Controller
 Dual Display Controller
 Conductivity Controller
Injection Controller
TDS/EC Controller
 Precipitator 1
 Precipitator 2
 Calibration Solutions
PS 202: DUAL DISPLAY TDS CONTROLLER click here for a printable view of this page
  • Simultaneously monitors and controls the TDS levels of two water lines (e.g., the feed water and product water) for high output commercial systems.
  • Large, bright L.E.D. displays.
  • An alarm will sound if the TDS level rises above the user-set level for both lines.
  • Installs easily in minutes.
  • Includes two sensor probes.

Install the Dual Display TDS Controller to constantly monitor TDS levels of water produced by a high-output system.

The Dual Display allows you to compare both measurements with just a quick glance.

Gauge the performance of your system by monitoring the feed water for percentage reduction.

Adjust the calibration to your needs.

Immediately know if the TDS levels rise above an acceptable level.

A photo of the sensor with cable. The sensor is detachable.

  • Range: 0 - 999ppm
  • Accuracy: ±2% f.s.
  • Resolution: 1 PPM
  • Temp. Compensation: Automatic (1 - 65 degrees Celsius)
  • Calibration: Adjustable
  • Setting: Controlled by on-screen up/down buttons
  • Relay Control: The unit will transmit an analog signal to a pump/valve when the ppm levels reache or exceed the control settings for either line
  • Alarm: Steady beep for both lines
  • Display: Bright 5/8" L.E.D. dual displays
  • 2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable
  • Power supply: AC 110V / AC 220V
  • Dimensions: 9.4 x 9.4 x 12.5 cm (3.7 x 3.7 x 4.9 in.)
  • Monitor Weight: 569.8 g (1 lb 4.1 oz)
  • Total Weight: 938.4 g (2 lbs 1.1 oz)

Download the User's Guide

  Copyright 2003 TDSMETER.CO.UK All rights reserved. HOME