Click to go home See Our Products Learn more about TDS and how it affects your water, reverse osmosis, water filters and water purification systems Frequently Asked Questions Where to buy TDSMETER.CO.UK products Learn about TDSMETER.CO.UK, Inc. Contact TDSMETER.CO.UK, Inc.
 HANDHELDS
 Basic TDS Tester
 TDS Meter 3
 TDS Meter 4
 TDS Meter 4TM
 EC/TDS Combo Meter
 Waterproof pH Meter
 Waterproof ORP Meter
 Thermometer
 TDS-EZ Water Quality
 AP-1: AquaPro (tds)
 AP-2: AquaPro (EC)
 Conductivity Tester
 Water Quality Tester
 IN-LINE MONITORS
 Dual TDS Monitor
 Dual TDS Monitor 2
 Clean Tap Monitor
 Purity Monitor
 External Purity Monitor
 FM-1: Filter Monitor
 FM-2: Filter Monitor
 PSC-150:TDS Controller
 QC-1:TDS Monitor
 In-Line Single Monitor
 CONTROLLERS
 Panel Mount Controller
 Dual TDS Controller
 Dual Display Controller
 Conductivity Controller
Injection Controller
TDS/EC Controller
 DEMONSTRATORS
 Precipitator 1
 Precipitator 2
 ACCESSORIES
 Calibration Solutions
 Sensors
PC 100: CONDUCTIVITY CONTROLLER click here for a printable view of this page
Buy now FEATURES
  • Monitors and controls conductivity levels for high output commercial systems.
  • Large, bright L.E.D. display.
  • An alarm will sound if the EC level rises above the user-set level.
  • Installs easily in minutes.

Install the Conductivity Controller to constantly monitor conductivity levels of water produced by a high-output system.

Adjust the calibration to your needs.

Immediately know if the conductivity levels rise above an acceptable level.


A photo of the sensor with cable. The sensor is detachable.

SPECIFICATIONS
  • Range: 0 - 999 S (micro-siemens)
  • Accuracy: ±2% f.s.
  • Resolution: 1 mS
  • Temp. Compensation: Automatic (1 - 65 degrees Celsius)
  • Calibration: Adjustable
  • Setting: Controlled by on-screen up/down buttons
  • Relay Control: The unit will transmit an analog signal to a pump/valve when the S level reaches or exceeds the control setting
  • Alarm: Optional steady beep (set by user)
  • Display: Bright 5/8" L.E.D. display
  • Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable
  • Power supply: AC 110V / AC 220V
  • Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
  • Monitor Weight: 476 g (1 lb .8 oz)
  • Total Weight: 680.4 g (1 lb 8 oz)
 

Download the User's Guide


  Copyright 2003 TDSMETER.CO.UK All rights reserved. HOME